GW Instek GSM-20H10 Programmable High Precision DC Source Meter

Doprava zdarma

Maximum output +-210 V / +- 1.05 A / 22 W
Built-in Sequence Output Modes (Stair, Log, SRC-MEM, Custom), up to 2500 Points
OVP / OTP Protection Function
0,012% Bacic Measure Accuracy with 6,5 digit Resolution
Variable Sampling Speed
SDM (Source Delay Measure) Cycle
2-, 4-, 6-wire Remote V-source and Measure Sensing
Variable Display Digits
Built-in Limit Function
Built-in 5 calculation functions
4,3" TFT LCD, Digital Number Keyboard
Built-in RTC Clock
Interface: RS-232, USBTMC, LAN, GPIB (Optional)

Cena bez DPH	113 906,00 Kč
Cena s DPH	137 826,26 Kč
ks
Dostupnost	Na dotaz
Kód produktu	GW_GSM-20H10

Záruka 24 měsíců

Stránka produktu u výrobce

Detailní informace
Videa a soubory ke stažení

Detailní popis GW Instek GSM-20H10 Programmable High Precision DC Source Meter

GW Instek GSM-20H10 is a precision source meter that provides highly stable DC power and instrument-grade 6½-digit multimeter measurements. While operating, it can be used as a voltage source, current source, voltmeter, ammeter, and ohmmeter, which is uniquely ideal for the evaluation of component characteristics and the test applications of production, including nanomaterials and components, semiconductor architecture, organic materials, high-efficiency illumination, passive components and material characteristics analysis, etc.

GSM-20H10 provides four-quadrant operation of ±210V/±1.05A/22W. The first and third quadrants operate as power supplies to supply power to the load. The second and fourth quadrants function as loads to consume power internally. Voltage value, current value and resistance value can be measured while operating the power supply or load function with an accuracy of 0.012% and a resolution of 1µV/10pA/10µΩ.

With respect to sampling rate, GSM-20H10 supports a sampling rate of up to 50k points/second, which can accurately analyze the characteristics of the DUT. With the large 4.3-inch screen, all measurement settings, parameters and results can be completely displayed on the screen. The SDM (Source Delay Measure) function is provided to delay sampling when the signal changes so as to prevent the unstable signal from being captured and cause misjudgment. There are four built-in sequence output modes (Stair, Log, SRC-MEM, Custom), which can support up to 2500 points of sequence variation output.

Pertaining to protection, GSM-20H10 provides OVP/OTP modes. The design of OVP allows users to self-define the range of OVP. OTP can effectively prevent errors caused by temperature drift during the test process. For interfaces, this product supports standard SCPI commands and provides RS-232, USBTMC, LAN, GPIB (optional) interfaces to meet users’ different interface needs

Nahoru

Zobrazit videa a soubory ke stažení »